Rated 3.8 out of 5 by 6
reviewers.
Rated 5 out of 5 by rwhit7 Rope light channel
We had a custom cabinet built and wanted rope lighting to go around the inside. Trying this, the roping would not lay flat against the shelving. Installed the channel and the rope clipped right in. Perfect solution.
June 12, 2011
Rated 5 out of 5 by dvsinger Excellent!
I had to hang rope lighting on a wall and was able to do so with the channels and some double sided sticky tape. I was also able to cut the channels for shorter spaces, it worked great!
July 1, 2012
Rated 2 out of 5 by Junebug This Product is too brittle at times.
Product is very effective but I found the plastic to be somewhat brittle at times, making the raceway shatter or crumble. I think this product is too pricey for what you get.
April 9, 2012
Rated 5 out of 5 by VIDAL Good product
This is a good product and is well recommended for its’ use with 3/8 or 1/2 lighting. In high heat areas an adhesive is recommended
June 10, 2011
Rated 4 out of 5 by Nick23 Fragile while cutting
these are very affective at holding the rope light in a straight line if visible. They are made of a very hard plastic that likes to splinter when cut.
June 7, 2011
Rated 2 out of 5 by Roundtrip This product is easy to install
The channel raceway, or rope lighting track looks good. It
is somewhat UV resistant and goes up easily. The fastest
and simplest installation is with double sided tape available
at most home improvement stores. It cuts to length easily with utility sissors. It is a good value for the price.
The plastic material is not very resistant to warm weather shipping. My order as well as a friend's order arrived warped
due to heat damage during shipping. The material looses its
UV resistance if installed outside after about 3-5 years. It
turns yellow and diminishes the overall appearance of the
lighting.
June 6, 2011